Good Quality Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC
Good Quality Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC Detail:
Products Design Features
Products design features
• Dual plate or single plate
• Light-weight & compact design
• Spring loaded disc
• Resilient or Metal seated
Products Range
Size: 2”- 24”
Rating: ANSI 150lb-600lb
Body material: Cast steel , Stainless steel
End connection: RF, RTJ, B.W
Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media.
The main structure features include:
1.The products feature a reasonable structure reliable seal good performance and nice modeling
2. Either soft or hard seal can be selected for the product upon different working conditions The sealing face is built up with Co-based carbide alloy.leaving a better we-arability corrosion and scrap resistance and a longer duration
3. Small opening pressure,the disc can be opened fully with a very small pressure differential
4. Inside-set bolt-bearing structure reduces leakage and reliable use
5. PN>16.0MPa(Class 1500),the middle cavity uses a seal-tightening sealing structure to have the sealing performance reinforced
along with the pressure rise so as to ensure the sealing performance
6. Different parts materials and different sizes for flange, butt-welding are available for sensible combination according to different working facts and customers requirements
Products Performance Specification
Technical Specification
| Structural formation | Butt-clamped lifting vertical type check valve |
| Design standard | JB/T 8937 |
| Face to face | JB/T 8937 |
| Flanged ends | JB/T 79. GB/T9113. HG20592 |
| Test & inspection | GB/T 13927. JB/T 9092 |
Note: The sizes of valve connecting flange and butt-welding terminas can be designed according to customer’s requirement.
Major Parts Material Form
| No. | Part name | Material |
| 1 | Body | WCB CF8 CF8M CF8C CF3 CF3M |
| 2 | Disc | WCB CF8 CF8M CF8C CF3 CF3M |
| 3 | Spring | 4Cr13608i2Mn06Cr18Ni11Ti06Cr18Ni |
| 4 | Plate | WCBCF8CF8MCF8CCF3、CF3M |
| 5 | Lock ring | 4Cr13、60Si2Mn、06Cr18Ni11Ti、06Cr18Ni12Mo2Ti |
Product detail pictures:
Related Product Guide:
We keep on with the theory of quality first, provider initially, constant improvement and innovation to meet the customers with the management and zero defect, zero complaints as the standard objective. To great our company, we deliver the merchandise using the fantastic excellent at the reasonable price for Good Quality Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC , The product will supply to all over the world, such as: Lithuania, Colombia, Haiti, Taking the core concept of to be the Responsible. We'll redound up on society for high quality merchandise and good service. We will initiative to participate in international competition to be a first- class manufacturer of this product in the world.
By Modesty from Angola - 2017.06.16 18:23
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By jari dedenroth from Suriname - 2017.03.08 14:45
Related products
-
Factory Outlets Drain Master Electric Gate Valv...
Products Design Features The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sealing surface, which is wearing resistant erosion proof, abrasion proof and long-lived. 3.The surface and the adjusting media of the valve shaft are nitrogenized so that it is erosion and abrasion resistant. 4.PN≥15.0M...
-
Factory making Lined Gate Valve - Threaded/Wel...
Products Design Features Stronger, Leakproof Body-bonnet Joint, Fully Encased Spiral Wound Gasket The design of the gasketed joint is critical. Its compression is better controlled in a fully enclosed cavity. Also, the possibility of unwinding of the SS spiral metal is eliminated. Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired po...
-
Special Price for Duct Gate Valve - Knife type...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sea...
-
Professional Design Carbon Steel Floating Ball ...
Product Information Type: EFB Type Design Specification: API 6D, API 608, BS 5351, GB 12237 Nominal Diameter: DN15~DN200 (NPS 1/2″~NPS 8″) Pressure Rating: PN1.6MPa~PN6 3MPa (Class150~Class300) Actuator: Manual Operated, Electrical Actuator etc Product Description Floating Ball Valve, is a basic product of Dipper Valve, it is used as shutoff valve in the pipeline, with good appearance, reliable sealing, small flow resistance, easy to open and close, long service life saf...
-
Cheap PriceList for Full Lug Butterfly Valve -...
Body • The valve body shall be one piece cast or fabrication. • The body can be supplied with different types of materials in wafer, lug, or flanged and butt welding end connections to satisfy all installation requirements. Body Seat • The valve seat shall be integrated with the body. • Stellite or stainless steel shall be applied on the seating surfaces of valve body. • The valve seat is designed for inclined cone to ensure non-rubbing, non-jamming, bi-directional shutoff, and zero...
-
Factory Free sample Miniature Ball Valve - Oxy...
Product Information Oxygen Valve belongs to a new usage ball valve, which be research and development to meet the request of transport oxygen under normal temperature in metallurgy industry. The valve can open and close quickly and easily, with small flow resistance, compact structure. Consider the characteristic of oxygen transportation, the valve designed with the anti-static structure to avoid friction. Each parts of valve have processed with degreasing treatment during manufacturing and a...