Chinese wholesale Pneumatic Operated Gate Valve - Bolted Bonnet OS&Y Gate Valve – BVMC
Chinese wholesale Pneumatic Operated Gate Valve - Bolted Bonnet OS&Y Gate Valve – BVMC Detail:
Products Design Features
Products design features
• Stellited seating surface
• Low emission control
• Flexible wedge
• Full guiding
• Absolute bonnet joint leak proof
• Optional by-pass design, Y Style Globe Valve, Check Valve.
Products Range
Size: 2”-24”
Rating: ANSI 600lb-2500lb
Body material: Carbon steel , Chromium Moly Alloy steel
Trim: Per API 600
Operation: Handwheel, Gear, Motor actuator
Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants.
The main structure features include:
1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling.
2.Co hard alloy welded sealing surface, which is wearing resistant erosion proof, abrasion proof and long-lived.
3.The surface and the adjusting media of the valve shaft are nitrogenized so that it is erosion and abrasion resistant.
4.PN≥15.0MPa(Class900), the middle cavity usea a self-tightening sealing structure to have the sealing performance reinforced along with the pressure rise so as to ensure the sealing performance.
5.There is no backward sealing structure in the valve, so the sealing id reliable
6.The material of the filling and the flange size can be chosen and matched according to the applications and the requirements of the use’s. That can satisfies all kinds of working requirements.
Main Parameter Of The Products
| Serial models | (Hs、Ps)Z11H(Hs、Ps)Z11Y、(Ps)Z41H、(Ps)Z41Y、(Ps)Z441H、(Ps)Z441Y(Ps)Z541H(Ps)Z541Y(Ps)Z941H(Ps)Z941Y | |||
| Pressure grade range | PN1.6-42.0MPa(Class150-2500) | |||
| Drift diameter range | DN15-1000mm(NPS1-40) | |||
| Driving manner | Hand wheel driving | Gear driving and electric driving | ||
| Scope of application | Class150-300(PN1.6-4.0) | Class400-600(PN6.4-10.0) | Class900-2500(PN15.0-42.0) | NPS2-40(DN50-1000mm) |
| NPS1/2-24(DN15-600mm) | NPS1/2-12(DN15~300mm) | NPS1/2-10(DN15~250mm) | ||
Products Performance Specification
Technical Specification
| Structural formation | Bolt-jointed bonnet outside stem yoke structure |
| Driving manner | Hand-operated,Gear-operated and Electric-driving |
| Design standard | GB/T 12234 |
| Face to face | GB/T12221 |
| Flanged ends | GB/T9113、JB/T 79 HG20592 |
| Test & inspection | GB/T13927、JB/T9092 |
Note: The sizes of valve connecting flange and butt-welding terminas can be designed according to customer’s requirement.
Major Parts Material Form
| No. | Part name | Material |
| 1 | Body | WCB、WC1、WC6、WC9、C5
CF8、CFM、CF8C、CF3、CF3M |
| 2 | Gate disc | WCB、WC1、WC6、WC9、C5
CF8、CF8M、CF8C、CF3、CF3M |
| 3 | Seat | A105、304、1Cr5Mo、12Cr1MoV |
| 4 | Stem | 1Cr13、2Cr13、12Cr18Ni9
06Cr18Ni12Mo2Ti、20Cr1Mo1V、25Cr2MoV |
| 5 | Stud | 35CrMoA、06Cr19Ni10
06Cr17Ni12Mo2、25Cr2MoV |
| 6 | Six angle nuts | 45、35CrMoA、25Cr2MoV、06Cr19Ni10、0Cr17Ni12Mo2 |
| 7 | Gasket | Graphite &stainless steel |
| 8 | Back seat | 12Cr1320Cr13.12Cr18Ni8
06Cr18Ni12Mo2Ti20Cr1Mo1V、25Cr2MoV |
| 9 | Bonnet | WCB.WC1WC6.WC.C5 CF8CF8MCF8CCF3CF3M |
| 10 | Packing | Graphite |
| 11 | Packing
press-sleeve |
1Cr132Cr13
12Cr18Ni906Cr18Ni12Mo2Ti
|
| 12 | Packing gland | WCB
CF8CF8MCF8CCF3CF3M |
| 13 | Valve stem nut | Copper alloy
|
| 14 | Handwheel | KTH350-10 QT400-15 |
Product detail pictures:
Related Product Guide:
It adheres on the tenet Honest, industrious, enterprising, innovative to acquire new solutions continuously. It regards prospects, success as its personal success. Let us build prosperous future hand in hand for Chinese wholesale Pneumatic Operated Gate Valve - Bolted Bonnet OS&Y Gate Valve – BVMC , The product will supply to all over the world, such as: Bulgaria, Morocco, Moscow, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to offer our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We are ready to face the worries and make the improve to understand all the possibilities in international trade.
By Honorio from Accra - 2017.04.08 14:55
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Mark from Sudan - 2018.09.21 11:44
Related products
-
Discountable price Hvac Gate Valve - Threaded/...
Products Design Features Stronger, Leakproof Body-bonnet Joint, Fully Encased Spiral Wound Gasket The design of the gasketed joint is critical. Its compression is better controlled in a fully enclosed cavity. Also, the possibility of unwinding of the SS spiral metal is eliminated. Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired po...
-
100% Original Factory Limit Switch Gate Valve -...
Products Design Features Stronger, Leakproof Body-bonnet Joint, Fully Encased Spiral Wound Gasket The design of the gasketed joint is critical. Its compression is better controlled in a fully enclosed cavity. Also, the possibility of unwinding of the SS spiral metal is eliminated. Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired po...
-
China OEM Leader Check Valve - Pressure Sealed...
Products Design Features Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media. The main structure features include: 1. The products feature a reasonable structure reliable seal good performance and nice modeling. 2. Either soft or hard seal can be selected for the product upon different workin...
-
Hot sale Slide Gate Valves - Bolted Bonnet OS&...
Products Design Features Products design features • Stellited seating surface • Low emission control • Flexible wedge • Full guiding • Absolute bonnet joint leak proof • Optional by-pass design, Y Style Globe Valve, Check Valve. Products Range Size: 2”-24” Rating: ANSI 600lb-2500lb Body material: Carbon steel , Chromium Moly Alloy steel Trim: Per API 600 Operation: Handwheel, Gear, Motor actuator Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal p...
-
Hot-selling Flanged Forged Steel Gate Valve - ...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sea...
-
China Supplier Epoxy Coated Gate Valve - High ...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sea...