8 Year Exporter Membrane Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC
8 Year Exporter Membrane Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC Detail:
Products Design Features
Products design features
• Dual plate or single plate
• Light-weight & compact design
• Spring loaded disc
• Resilient or Metal seated
Products Range
Size: 2”- 24”
Rating: ANSI 150lb-600lb
Body material: Cast steel , Stainless steel
End connection: RF, RTJ, B.W
Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media.
The main structure features include:
1.The products feature a reasonable structure reliable seal good performance and nice modeling
2. Either soft or hard seal can be selected for the product upon different working conditions The sealing face is built up with Co-based carbide alloy.leaving a better we-arability corrosion and scrap resistance and a longer duration
3. Small opening pressure,the disc can be opened fully with a very small pressure differential
4. Inside-set bolt-bearing structure reduces leakage and reliable use
5. PN>16.0MPa(Class 1500),the middle cavity uses a seal-tightening sealing structure to have the sealing performance reinforced
along with the pressure rise so as to ensure the sealing performance
6. Different parts materials and different sizes for flange, butt-welding are available for sensible combination according to different working facts and customers requirements
Products Performance Specification
Technical Specification
| Structural formation | Butt-clamped lifting vertical type check valve |
| Design standard | JB/T 8937 |
| Face to face | JB/T 8937 |
| Flanged ends | JB/T 79. GB/T9113. HG20592 |
| Test & inspection | GB/T 13927. JB/T 9092 |
Note: The sizes of valve connecting flange and butt-welding terminas can be designed according to customer’s requirement.
Major Parts Material Form
| No. | Part name | Material |
| 1 | Body | WCB CF8 CF8M CF8C CF3 CF3M |
| 2 | Disc | WCB CF8 CF8M CF8C CF3 CF3M |
| 3 | Spring | 4Cr13608i2Mn06Cr18Ni11Ti06Cr18Ni |
| 4 | Plate | WCBCF8CF8MCF8CCF3、CF3M |
| 5 | Lock ring | 4Cr13、60Si2Mn、06Cr18Ni11Ti、06Cr18Ni12Mo2Ti |
Product detail pictures:
Related Product Guide:
We believe in: Innovation is our soul and spirit. Top quality is our life. Purchaser need is our God for 8 Year Exporter Membrane Check Valve - Butt-Clamped Lifting Vertical Type Check Valve – BVMC , The product will supply to all over the world, such as: Mombasa, Zurich, UK, We hope we can establish long-term cooperation with all of the customers, and hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need to have!Welcome all customers both at home and abroad to visit our factory. We hope to have win-win business relationships with you, and create a better tomorrow.
By Frank from Finland - 2018.09.23 18:44
This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
By Hellyngton Sato from Australia - 2017.08.15 12:36
Related products
-
100% Original Ss Gate Valve - Bolted Bonnet OS...
Products Design Features Products design features • Stellited seating surface • Low emission control • Flexible wedge • Full guiding • Absolute bonnet joint leak proof • Optional by-pass design, Y Style Globe Valve, Check Valve. Products Range Size: 2”-24” Rating: ANSI 600lb-2500lb Body material: Carbon steel , Chromium Moly Alloy steel Trim: Per API 600 Operation: Handwheel, Gear, Motor actuator Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal p...
-
Good Quality Gate Valve - Low temperature Gate...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welde...
-
Factory making Lined Gate Valve - Flat Gate Va...
Introduction Through conduit valves are widely used for oil and gas pipeline service. This type of valve has such function that, when fully opened, media passage capability superior to valves in use for general secondary process line, it can also be capable for pig ball Cleaning service. BVMC through conduit gate valves are available in Slab Gate and Expanding Gate design and both are fully comply with API 6D standard. Slab Gate Valve Slab gate valve is simple in design but efficien...
-
PriceList for Male To Male Ball Valve - High P...
Performance Specification Pressure Testing pressure at constant temperature (MPa) Applicable temperature Applicable medium The shell testing High-pressure seal Low-pressure seal Nominal rating pressure(PN) 1.6 2.4 1.76 0.6 -29~121℃ or upon the user requirement Natural gas,liquefied gas,coal gas,oil,water, requirement 2.5 3.75 2.75 0.6 4.0 6.0 4.4 0.6 6.4 9.6 7.04 0.6 10.0 15.0 11.0 0.6 16.0 24.0 17.6 0.6 Pressure classes(Class) 150 2.94 2.16 0.6 300 7.67 5.62 0...
-
Factory Price Ptfe Lined Globe Valve - Bolted ...
Products Design Features Globe valve are used to cut or connect the pipe media under nominal pressure betweenPN1.6-160MPa(Class150-2500) working temperaturess600C.in oil industry chemical industry pharmaceuticals fertilizer and power industry. The main structure features include: 1、Rational structure.reliable sealing excellent performance pretty appearance 2、Co-radix alloy welded sealing surface anti-wearing erosion-proof abrasion-proof and longer use life. 3、The surface and the adjus...
-
Europe style for Marine Globe Valve - Bolted B...
Products Design Features Globe valve are used to cut or connect the pipe media under nominal pressure betweenPN1.6-160MPa(Class150-2500) working temperaturess600C.in oil industry chemical industry pharmaceuticals fertilizer and power industry. The main structure features include: 1、Rational structure.reliable sealing excellent performance pretty appearance 2、Co-radix alloy welded sealing surface anti-wearing erosion-proof abrasion-proof and longer use life. 3、The surface and the adjus...